Needle roller bearing

INA, CRAFT, TOPROL, JHB and KYK Japan needle roller bearings for combines, tractors, gearboxes and joint mechanisms. They take up little space yet carry high radial loads, so they are used where there is no room for a ball bearing.

Types of needle bearings in stock

  • HK – drawn cup needle bearing open on both sides, the most common type
  • BK – drawn cup closed on one side, for shaft ends
  • BH and SCE – drawn cups in inch sizes
  • NA and NKI – needle roller bearings with inner ring
  • RNA – needle roller bearings without inner ring, needles run directly on the shaft
  • PNA – self-aligning needle roller bearings

How to read the designation

For HK drawn cups, HK 2520 means a 25 mm shaft diameter and 20 mm width. For NA series bearings, e.g. NA 4904, the last two digits indicate the bore: 04 = 20 mm (the number is multiplied by 5). If the designation is not readable, measure the inner diameter, outer diameter and width and enter them in the dimension filter.

Code Product Name Designation Brand Prefix Basic designation Suffix Alternative designation Inner diameter [d] or [Fw] (mm) Outer diameter [D] (mm) Width [B] or [H] or [C] (mm) Weight (kg) Price Add To Cart
NA 4907 bearing INA (NA4907-XL)
1012050 NA 4907 bearing "INA" (NA4907-XL) NA4907-XL INA - - - - - - - - 3.120,00 RSD
NA 4909 bearing INA (NA4909-XL)
1012051 NA 4909 bearing "INA" (NA4909-XL) NA4909-XL INA - - - - - - - - 3.999,00 RSD
NA 4910 bearing INA (NA4910-XL)
1012052 NA 4910 bearing "INA" (NA4910-XL) NA4910-XL INA - - - - - - - - 4.517,00 RSD
NKI 35/20 bearing INA (NKI35/20-TV-XL)
1012061 NKI 35/20 bearing "INA" (NKI35/20-TV-XL) NKI35/20-TV-XL INA - - - - - - - - 2.679,00 RSD
PNA 25/47 bearing INA (PNA25/47-XL)
1012065 PNA 25/47 bearing "INA" (PNA25/47-XL) PNA25/47-XL INA - - - - - - - - 5.031,00 RSD
PNA 30/52 bearing INA (PNA30/52-XL)
1012066 PNA 30/52 bearing "INA" (PNA30/52-XL) PNA30/52-XL INA - - - - - - - - 0,00 RSD
RNA 49/28 bearing INA (RNA49/28-XL)
1012069 RNA 49/28 bearing "INA" (RNA49/28-XL) RNA49/28-XL INA - - - - - - - - 1.989,00 RSD
RNA 4910 bearing INA (RNA4910-XL)
1012070 RNA 4910 bearing "INA" (RNA4910-XL) RNA4910-XL INA - - - - - - - - 3.345,00 RSD
RPNA 35/52 bearing INA (RPNA35/52-XL)
1012071 RPNA 35/52 bearing "INA" (RPNA35/52-XL) RPNA35/52-XL INA - - - - - - - - 4.306,00 RSD
SCE 108 bearing INA (SCE108)
1012077 SCE 108 bearing "INA" (SCE108) SCE108 INA - - - - - - - - 298,00 RSD
AXK 3552 bearing INA (AXK3552-A/0-10)
1012123 AXK 3552 bearing "INA" (AXK3552-A/0-10) AXK3552-A/0-10 INA - - - - - - - - 0,00 RSD
HK 3020 bearing CRAFT (HK3020.NOB)
1012363 HK 3020 bearing "CRAFT" (HK3020.NOB) HK3020.NOB CRAFT - - - - - - - - 136,00 RSD

What is the difference between an HK drawn cup and an NA bearing?

HK is a thin drawn cup without an inner ring, so the needles run directly on the shaft, which must be hardened and ground. An NA bearing has an inner ring and is used when the shaft is not prepared for direct needle contact.

What does HK 2520 mean?

HK is the bearing type (open drawn cup), 25 is the shaft diameter in millimetres and 20 is the bearing width in millimetres.

When is a needle bearing used instead of a ball bearing?

When the space for the bearing is small and the radial load is high, as in gearboxes, joints and eccentric mechanisms. A needle bearing is much thinner than a ball bearing of the same load capacity.

How is a drawn cup needle bearing fitted?

The cup is pressed into the housing with a press, using a tool that bears on the marked end of the cup. Do not hammer the cup directly, as it is thin and easily deformed.

Cookie settings

We use cookies to make this website work properly and to improve your user experience.
By continuing to use our website, you accept the use of cookies.