Needle roller bearing
INA, CRAFT, TOPROL, JHB and KYK Japan needle roller bearings for combines, tractors, gearboxes and joint mechanisms. They take up little space yet carry high radial loads, so they are used where there is no room for a ball bearing.
Types of needle bearings in stock
- HK – drawn cup needle bearing open on both sides, the most common type
- BK – drawn cup closed on one side, for shaft ends
- BH and SCE – drawn cups in inch sizes
- NA and NKI – needle roller bearings with inner ring
- RNA – needle roller bearings without inner ring, needles run directly on the shaft
- PNA – self-aligning needle roller bearings
How to read the designation
For HK drawn cups, HK 2520 means a 25 mm shaft diameter and 20 mm width. For NA series bearings, e.g. NA 4904, the last two digits indicate the bore: 04 = 20 mm (the number is multiplied by 5). If the designation is not readable, measure the inner diameter, outer diameter and width and enter them in the dimension filter.
| Code | Product Name | Designation | Brand | Prefix | Basic designation | Suffix | Alternative designation | Inner diameter [d] or [Fw] (mm) | Outer diameter [D] (mm) | Width [B] or [H] or [C] (mm) | Weight (kg) | Price | Add To Cart | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
1004928 | NKI 35/20 bearing "KYK" (HQNKI35/20) | HQNKI35/20 | KYK JAPAN | - | - | - | - | - | - | - | - | 0,00 RSD | |
![]() |
1005321 | NKI 35/20 bearing "TOPROL" (NKI35/20) | NKI35/20 | TOPROL | - | - | - | - | - | - | - | - | 0,00 RSD | |
![]() |
1006136 | PNA 25/47 bearing "JHB" (PNA25/47) [CL 705028.0] | PNA 25/47 | JHB | - | - | - | - | - | - | - | - | 0,00 RSD | |
![]() |
1006137 | PNA 30/52 bearing "JHB" (PNA30/52) [CL 238379.0] | PNA 30/52 | JHB | - | - | - | - | - | - | - | - | 0,00 RSD | |
![]() |
1006141 | RNA 49/28 bearing "JHB" (RNA49/28) (10-7714) [CL 215523.1] | RNA 49/28 | JHB | - | - | - | - | - | - | - | - | 1.997,00 RSD | |
![]() |
1006939 | RNA 4910 bearing "JHB" (RNA4910) [CL 215135.0] | RNA4910 | JHB | - | - | - | - | - | - | - | - | 0,00 RSD | |
![]() |
1006139 | RPNA 35/52 bearing "JHB" (RPNA35/52) [CL 238965.0] | RPNA 35/52 | JHB | - | - | - | - | - | - | - | - | 0,00 RSD | |
![]() |
1004016 | SCE 108 bearing "TOPROL" (SCE 108) | SCE 108 | TOPROL | - | - | - | - | - | - | - | - | 0,00 RSD | |
![]() |
1005312 | SCE 228 bearing "TOPROL" (SCE228) | SCE 228 | TOPROL | - | - | - | - | - | - | - | - | 0,00 RSD | |
![]() |
1004027 | SCE 2816 bearing "TOPROL" (SCE 2816) | SCE 2816 | TOPROL | - | - | - | - | - | - | - | - | 296,00 RSD | |
![]() |
1007638 | HK 3016 bearing "CRAFT" (HK3016.NOB-R) | HK3016.NOB-R | CRAFT | - | - | - | - | - | - | - | - | 157,00 RSD | |
![]() |
1007639 | NA 4905 bearing "CRAFT" (NA4905.CRF) | NA4905.CRF | CRAFT | - | - | - | - | - | - | - | - | 402,00 RSD | |
![]() |
1008100 | HK 3038 bearing "CRAFT" (HK3038.NOB) | HK3038.NOB | CRAFT | - | - | - | - | - | - | - | - | 215,00 RSD | |
![]() |
1008104 | NA 4906 bearing "CRAFT" (NA4906.CRF) | NA4906.CRF | CRAFT | - | - | - | - | - | - | - | - | 432,00 RSD | |
![]() |
1008105 | NA 4909 bearing "CRAFT" (NA4909.CRF) | NA4909.CRF | CRAFT | - | - | - | - | - | - | - | - | 947,00 RSD | |
![]() |
1008300 | HK 1512 bearing "CRAFT" (HK1512.NOB) | HK1512.NOB | CRAFT | - | - | - | - | - | - | - | - | 62,00 RSD | |
![]() |
1008301 | HK 1612 bearing "CRAFT" (HK1612.NOB) | HK1612.NOB | CRAFT | - | - | - | - | - | - | - | - | 53,00 RSD | |
![]() |
1008302 | HK 1816 bearing "CRAFT" (HK1816.NOB) | HK1816.NOB | CRAFT | - | - | - | - | - | - | - | - | 79,00 RSD | |
![]() |
1008303 | HK 2526 bearing "CRAFT" (HK2526.NOB) | HK2526.NOB | CRAFT | - | - | - | - | - | - | - | - | 230,00 RSD | |
![]() |
1008304 | HK 3520 bearing "CRAFT" (HK3520.NOB) | HK3520.NOB | CRAFT | - | - | - | - | - | - | - | - | 176,00 RSD |
What is the difference between an HK drawn cup and an NA bearing?
HK is a thin drawn cup without an inner ring, so the needles run directly on the shaft, which must be hardened and ground. An NA bearing has an inner ring and is used when the shaft is not prepared for direct needle contact.
What does HK 2520 mean?
HK is the bearing type (open drawn cup), 25 is the shaft diameter in millimetres and 20 is the bearing width in millimetres.
When is a needle bearing used instead of a ball bearing?
When the space for the bearing is small and the radial load is high, as in gearboxes, joints and eccentric mechanisms. A needle bearing is much thinner than a ball bearing of the same load capacity.
How is a drawn cup needle bearing fitted?
The cup is pressed into the housing with a press, using a tool that bears on the marked end of the cup. Do not hammer the cup directly, as it is thin and easily deformed.



![PNA 25/47 bearing JHB (PNA25/47) [CL 705028.0]](https://images.agrimar.rs/1722357155/product-small/pna-25-47-ležaj-jhb-pna25-47-cl-705028-0_1006136.jpg)
![PNA 30/52 bearing JHB (PNA30/52) [CL 238379.0]](https://images.agrimar.rs/1722357154/product-small/pna-30-52-ležaj-jhb-pna30-52-cl-238379-0_1006137.jpg)
![RNA 49/28 bearing JHB (RNA49/28) (10-7714) [CL 215523.1]](https://images.agrimar.rs/1722357154/product-small/rna-49-28-ležaj-jhb-rna49-28-10-7714-cl-215523-1_1006141.jpg)
![RNA 4910 bearing JHB (RNA4910) [CL 215135.0]](https://images.agrimar.rs/1722357163/product-small/rna-4910-ležaj-jhb-rna4910-cl-215135-0_1006939.jpg)
![RPNA 35/52 bearing JHB (RPNA35/52) [CL 238965.0]](https://images.agrimar.rs/1722357154/product-small/rpna-35-52-ležaj-jhb-rpna35-52-cl-238965-0_1006139.jpg)












