Needle roller bearing
INA, CRAFT, TOPROL, JHB and KYK Japan needle roller bearings for combines, tractors, gearboxes and joint mechanisms. They take up little space yet carry high radial loads, so they are used where there is no room for a ball bearing.
Types of needle bearings in stock
- HK – drawn cup needle bearing open on both sides, the most common type
- BK – drawn cup closed on one side, for shaft ends
- BH and SCE – drawn cups in inch sizes
- NA and NKI – needle roller bearings with inner ring
- RNA – needle roller bearings without inner ring, needles run directly on the shaft
- PNA – self-aligning needle roller bearings
How to read the designation
For HK drawn cups, HK 2520 means a 25 mm shaft diameter and 20 mm width. For NA series bearings, e.g. NA 4904, the last two digits indicate the bore: 04 = 20 mm (the number is multiplied by 5). If the designation is not readable, measure the inner diameter, outer diameter and width and enter them in the dimension filter.
| Code | Product Name | Designation | Brand | Prefix | Basic designation | Suffix | Alternative designation | Inner diameter [d] or [Fw] (mm) | Outer diameter [D] (mm) | Width [B] or [H] or [C] (mm) | Weight (kg) | Price | Add To Cart | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
1008313 | NA 4902 bearing "CRAFT" (NA4902.CRF) | NA4902.CRF | CRAFT | - | - | - | - | - | - | - | - | 227,00 RSD | |
![]() |
1008314 | NA 4903 bearing "CRAFT" (NA4903.CRF) | NA4903.CRF | CRAFT | - | - | - | - | - | - | - | - | 415,00 RSD | |
![]() |
1008315 | NA 4904 bearing "CRAFT" (NA4904.CRF) | NA4904.CRF | CRAFT | - | - | - | - | - | - | - | - | 309,00 RSD | |
![]() |
1008316 | NA 4907 bearing "CRAFT" (NA4907.CRF) | NA4907.CRF | CRAFT | - | - | - | - | - | - | - | - | 696,00 RSD | |
![]() |
1008317 | NA 4908 bearing "CRAFT" (NA4908.CRF) | NA4908.CRF | CRAFT | - | - | - | - | - | - | - | - | 0,00 RSD | |
![]() |
1009061 | NA 4910 bearing "CRAFT" (NA4910.CRF) | NA4910.CRF | CRAFT | - | - | - | - | - | - | - | - | 862,00 RSD | |
![]() |
1009505 | HK 2820 bearing "CRAFT" (HK2820.NOB) | HK2820.NOB | CRAFT | - | - | - | - | - | - | - | - | 153,00 RSD | |
![]() |
1009984 | HK 2030 bearing "CRAFT" (HK2030.NOB) | HK2030.NOB | CRAFT | - | - | - | - | - | - | - | - | 129,00 RSD | |
![]() |
1010010 | HK 2520 bearing "CRAFT" (HK2520.NOB) | HK2520.NOB | CRAFT | - | - | - | - | - | - | - | - | 127,00 RSD | |
![]() |
1010697 | BH 1312 bearing "BEPCO" (BH1312) [MF 832879M1] | BH1312 | BEPCO | - | - | - | - | - | - | - | - | 0,00 RSD | |
![]() |
1010782 | BH 1816 bearing "JHB" (BH1816) [JD JD8898] | BH1816 | JHB | - | - | - | - | - | - | - | - | 965,00 RSD | |
![]() |
1010950 | NA 4909 2RS bearing "CRAFT" (NA4909-2RS.CRF) | NA4909-2RS.CRF | CRAFT | - | - | - | - | - | - | - | - | 662,00 RSD | |
![]() |
1011299 | HK 2016 bearing "JHB" (HK2016) [NH 80354122] | HK2016 | JHB | - | - | - | - | - | - | - | - | 325,00 RSD | |
![]() |
1011325 | HK 4520 bearing "CRAFT" (HK4520.CRF) | HK4520.CRF | CRAFT | - | - | - | - | - | - | - | - | 164,00 RSD | |
![]() |
1011995 | BK 2526 bearing "INA" (BK2526-A) | BK2526-A | INA | - | - | - | - | - | - | - | - | 826,00 RSD | |
![]() |
1012014 | HK 1512 bearing "INA" (HK1512-B) | HK1512-B | INA | - | - | - | - | - | - | - | - | 361,00 RSD | |
![]() |
1012015 | HK 1612 bearing "INA" (HK1612-B) | HK1612-B | INA | - | - | - | - | - | - | - | - | 365,00 RSD | |
![]() |
1012016 | HK 1816 bearing "INA" (HK1816-B) | HK1816-B | INA | - | - | - | - | - | - | - | - | 409,00 RSD | |
![]() |
1012017 | HK 2012 bearing "INA" (HK2012-B) | HK2012-B | INA | - | - | - | - | - | - | - | - | 384,00 RSD | |
![]() |
1012018 | HK 2220 bearing "INA" (HK2220-B) | HK2220-B | INA | - | - | - | - | - | - | - | - | 507,00 RSD |
What is the difference between an HK drawn cup and an NA bearing?
HK is a thin drawn cup without an inner ring, so the needles run directly on the shaft, which must be hardened and ground. An NA bearing has an inner ring and is used when the shaft is not prepared for direct needle contact.
What does HK 2520 mean?
HK is the bearing type (open drawn cup), 25 is the shaft diameter in millimetres and 20 is the bearing width in millimetres.
When is a needle bearing used instead of a ball bearing?
When the space for the bearing is small and the radial load is high, as in gearboxes, joints and eccentric mechanisms. A needle bearing is much thinner than a ball bearing of the same load capacity.
How is a drawn cup needle bearing fitted?
The cup is pressed into the housing with a press, using a tool that bears on the marked end of the cup. Do not hammer the cup directly, as it is thin and easily deformed.










![BH 1312 bearing BEPCO (BH1312) [MF 832879M1]](https://images.agrimar.rs/1722357651/product-small/bh-1312-ležaj-bepco-bh1312-mf-832879m1_1010697.jpg)
![BH 1816 bearing JHB (BH1816) [JD JD8898]](https://images.agrimar.rs/1722357656/product-small/bh-1816-ležaj-jhb-bh1816-jd-jd8898_1010782.jpg)

![HK 2016 bearing JHB (HK2016) [NH 80354122]](https://images.agrimar.rs/1721819490/product-small/default-product.png)






