Needle roller bearing

INA, CRAFT, TOPROL, JHB and KYK Japan needle roller bearings for combines, tractors, gearboxes and joint mechanisms. They take up little space yet carry high radial loads, so they are used where there is no room for a ball bearing.

Types of needle bearings in stock

  • HK – drawn cup needle bearing open on both sides, the most common type
  • BK – drawn cup closed on one side, for shaft ends
  • BH and SCE – drawn cups in inch sizes
  • NA and NKI – needle roller bearings with inner ring
  • RNA – needle roller bearings without inner ring, needles run directly on the shaft
  • PNA – self-aligning needle roller bearings

How to read the designation

For HK drawn cups, HK 2520 means a 25 mm shaft diameter and 20 mm width. For NA series bearings, e.g. NA 4904, the last two digits indicate the bore: 04 = 20 mm (the number is multiplied by 5). If the designation is not readable, measure the inner diameter, outer diameter and width and enter them in the dimension filter.

Code Product Name Designation Brand Prefix Basic designation Suffix Alternative designation Inner diameter [d] or [Fw] (mm) Outer diameter [D] (mm) Width [B] or [H] or [C] (mm) Weight (kg) Price Add To Cart
HK 2516 bearing INA (HK2516-B)
1012019 HK 2516 bearing "INA" (HK2516-B) HK2516-B INA - - - - - - - - 474,00 RSD
HK 2520 bearing INA (HK2520-B)
1012020 HK 2520 bearing "INA" (HK2520-B) HK2520-B INA - - - - - - - - 476,00 RSD
HK 2526 bearing INA (HK2526)
1012021 HK 2526 bearing "INA" (HK2526) HK2526 INA - - - - - - - - 608,00 RSD
HK 2820 bearing INA (HK2820-B)
1012022 HK 2820 bearing "INA" (HK2820-B) HK2820-B INA - - - - - - - - 0,00 RSD
HK 3016 bearing INA (HK3016-B)
1012023 HK 3016 bearing "INA" (HK3016-B) HK3016-B INA - - - - - - - - 0,00 RSD
HK 3020 bearing INA (HK3020-B)
1012024 HK 3020 bearing "INA" (HK3020-B) HK3020-B INA - - - - - - - - 587,00 RSD
HK 3520 bearing INA (HK3520-B)
1012025 HK 3520 bearing "INA" (HK3520-B) HK3520-B INA - - - - - - - - 623,00 RSD
HK 4020 bearing INA (HK4020-B)
1012026 HK 4020 bearing "INA" (HK4020-B) HK4020-B INA - - - - - - - - 847,00 RSD
HK 4518 bearing INA (HK4518-RS-A-L271)
1012027 HK 4518 bearing "INA" (HK4518-RS-A-L271) HK4518-RS-A-L271 INA - - - - - - - - 1.053,00 RSD
HK 4520 bearing INA (HK4520-B)
1012028 HK 4520 bearing "INA" (HK4520-B) HK4520-B INA - - - - - - - - 0,00 RSD
K 18x22x17 bearing INA (K18X22X17-A/0-7)
1012031 K 18x22x17 bearing "INA" (K18X22X17-A/0-7) K18X22X17-A/0-7 INA - - - - - - - - 493,00 RSD
K 20x24x17 bearing INA (K20X24X17-A/0-7)
1012032 K 20x24x17 bearing "INA" (K20X24X17-A/0-7) K20X24X17-A/0-7 INA - - - - - - - - 460,00 RSD
K 24x30x17 bearing INA (K24X30X17-A/0-7)
1012033 K 24x30x17 bearing "INA" (K24X30X17-A/0-7) K24X30X17-A/0-7 INA - - - - - - - - 0,00 RSD
K 30x40x30 bearing INA (K30X40X30-A/0-7)
1012034 K 30x40x30 bearing "INA" (K30X40X30-A/0-7) K30X40X30-A/0-7 INA - - - - - - - - 0,00 RSD
K 32x38x26 bearing INA (K32X38X26-A/0-7)
1012035 K 32x38x26 bearing "INA" (K32X38X26-A/0-7) K32X38X26-A/0-7 INA - - - - - - - - 2.704,00 RSD
K 38x46x20 bearing INA (K38X46X20-B/0-7)
1012036 K 38x46x20 bearing "INA" (K38X46X20-B/0-7) K38X46X20-B/0-7 INA - - - - - - - - 1.224,00 RSD
NA 4903 bearing INA (NA4903-XL)
1012046 NA 4903 bearing "INA" (NA4903-XL) NA4903-XL INA - - - - - - - - 1.990,00 RSD
NA 4904 bearing INA (NA4904-XL)
1012047 NA 4904 bearing "INA" (NA4904-XL) NA4904-XL INA - - - - - - - - 2.159,00 RSD
NA 4905 bearing INA (NA4905-XL)
1012048 NA 4905 bearing "INA" (NA4905-XL) NA4905-XL INA - - - - - - - - 2.696,00 RSD
NA 4906 bearing INA (NA4906-XL)
1012049 NA 4906 bearing "INA" (NA4906-XL) NA4906-XL INA - - - - - - - - 2.771,00 RSD

What is the difference between an HK drawn cup and an NA bearing?

HK is a thin drawn cup without an inner ring, so the needles run directly on the shaft, which must be hardened and ground. An NA bearing has an inner ring and is used when the shaft is not prepared for direct needle contact.

What does HK 2520 mean?

HK is the bearing type (open drawn cup), 25 is the shaft diameter in millimetres and 20 is the bearing width in millimetres.

When is a needle bearing used instead of a ball bearing?

When the space for the bearing is small and the radial load is high, as in gearboxes, joints and eccentric mechanisms. A needle bearing is much thinner than a ball bearing of the same load capacity.

How is a drawn cup needle bearing fitted?

The cup is pressed into the housing with a press, using a tool that bears on the marked end of the cup. Do not hammer the cup directly, as it is thin and easily deformed.

Cookie settings

We use cookies to make this website work properly and to improve your user experience.
By continuing to use our website, you accept the use of cookies.