Needle roller bearing

INA, CRAFT, TOPROL, JHB and KYK Japan needle roller bearings for combines, tractors, gearboxes and joint mechanisms. They take up little space yet carry high radial loads, so they are used where there is no room for a ball bearing.

Types of needle bearings in stock

  • HK – drawn cup needle bearing open on both sides, the most common type
  • BK – drawn cup closed on one side, for shaft ends
  • BH and SCE – drawn cups in inch sizes
  • NA and NKI – needle roller bearings with inner ring
  • RNA – needle roller bearings without inner ring, needles run directly on the shaft
  • PNA – self-aligning needle roller bearings

How to read the designation

For HK drawn cups, HK 2520 means a 25 mm shaft diameter and 20 mm width. For NA series bearings, e.g. NA 4904, the last two digits indicate the bore: 04 = 20 mm (the number is multiplied by 5). If the designation is not readable, measure the inner diameter, outer diameter and width and enter them in the dimension filter.

Code Product Name Designation Brand Prefix Basic designation Suffix Alternative designation Inner diameter [d] or [Fw] (mm) Outer diameter [D] (mm) Width [B] or [H] or [C] (mm) Weight (kg) Price Add To Cart
18x22x17 bearing TOPROL (18x22x17)
1004077 18x22x17 bearing "TOPROL" (18x22x17) 18x22x17 TOPROL - - - - - - - - 108,00 RSD
BH 1416 bearing JHB (BH1416) [JD JD9977]
1006940 BH 1416 bearing "JHB" (BH1416) [JD JD9977] BH1416 JHB - - - - - - - - 941,00 RSD
BK 2526 bearing JHB (BK2526) [CL 234491.0]
1006123 BK 2526 bearing "JHB" (BK2526) [CL 234491.0] BK 2526 JHB - - - - - - - - 469,00 RSD
HK 2012 bearing CRAFT (HK2012.NOB)
1007411 HK 2012 bearing "CRAFT" (HK2012.NOB) HK2012.NOB CRAFT - - - - - - - - 79,00 RSD
HK 2220 bearing KYK (HQHK2220)
1005397 HK 2220 bearing "KYK" (HQHK2220) HQHK2220 KYK JAPAN - - - - - - - - 177,00 RSD
HK 2220 bearing TOPROL (HK 2220)
1004025 HK 2220 bearing "TOPROL" (HK 2220) HK 2220 TOPROL - - - - - - - - 101,00 RSD
HK 2516 bearing CRAFT (HK2516.NOB)
1007412 HK 2516 bearing "CRAFT" (HK2516.NOB) HK2516.NOB CRAFT - - - - - - - - 115,00 RSD
HK 2520 bearing TOPROL (HK 2520)
1004026 HK 2520 bearing "TOPROL" (HK 2520) HK 2520 TOPROL - - - - - - - - 0,00 RSD
HK 2820 bearing TOPROL (HK 2820)
1004028 HK 2820 bearing "TOPROL" (HK 2820) HK 2820 TOPROL - - - - - - - - 0,00 RSD
HK 3016 bearing TOPROL (HK 3016)
1004029 HK 3016 bearing "TOPROL" (HK 3016) HK 3016 TOPROL - - - - - - - - 0,00 RSD
HK 3020 bearing KYK (HQHK3020)
1004926 HK 3020 bearing "KYK" (HQHK3020) HQHK3020 KYK JAPAN - - - - - - - - 219,00 RSD
HK 3020 bearing TOPROL (HK 3020)
1004470 HK 3020 bearing "TOPROL" (HK 3020) HK 3020 TOPROL - - - - - - - - 136,00 RSD
HK 3520 bearing JHB (HK3520) [CL 238624.0; JD JD38918; NH 80354123]
1006937 HK 3520 bearing "JHB" (HK3520) [CL 238624.0; JD JD38918; NH 80354123] HK3520 JHB - - - - - - - - 0,00 RSD
HK 4020 bearing TOPROL (HK 4020)
1004040 HK 4020 bearing "TOPROL" (HK 4020) HK 4020 TOPROL - - - - - - - - 209,00 RSD
HK 4518 bearing JHB (HK4518) [CL 238941.0]
1006938 HK 4518 bearing "JHB" (HK4518) [CL 238941.0] HK4518 JHB - - - - - - - - 730,00 RSD
HK 4520 bearing TOPROL (HK 4520)
1004471 HK 4520 bearing "TOPROL" (HK 4520) HK 4520 TOPROL - - - - - - - - 0,00 RSD
K 20x24x17 F bearing TOPROL (K 20x24x17 F)
1004078 K 20x24x17 F bearing "TOPROL" (K 20x24x17 F) K 20x24x17 F TOPROL - - - - - - - - 130,00 RSD
K 32x38x26 bearing TOPROL (K 32x38x26 )
1004079 K 32x38x26 bearing "TOPROL" (K 32x38x26 ) K 32x38x26 TOPROL - - - - - - - - 209,00 RSD
K 38x46x20 bearing TOPROL (K 38x46x20)
1004475 K 38x46x20 bearing "TOPROL" (K 38x46x20) K 38x46x20 TOPROL - - - - - - - - 0,00 RSD
NA 4910 2RS bearing CRAFT (NA4910-2RS.CRF)
1007416 NA 4910 2RS bearing "CRAFT" (NA4910-2RS.CRF) NA4910-2RS.CRF CRAFT - - - - - - - - 0,00 RSD

What is the difference between an HK drawn cup and an NA bearing?

HK is a thin drawn cup without an inner ring, so the needles run directly on the shaft, which must be hardened and ground. An NA bearing has an inner ring and is used when the shaft is not prepared for direct needle contact.

What does HK 2520 mean?

HK is the bearing type (open drawn cup), 25 is the shaft diameter in millimetres and 20 is the bearing width in millimetres.

When is a needle bearing used instead of a ball bearing?

When the space for the bearing is small and the radial load is high, as in gearboxes, joints and eccentric mechanisms. A needle bearing is much thinner than a ball bearing of the same load capacity.

How is a drawn cup needle bearing fitted?

The cup is pressed into the housing with a press, using a tool that bears on the marked end of the cup. Do not hammer the cup directly, as it is thin and easily deformed.

Cookie settings

We use cookies to make this website work properly and to improve your user experience.
By continuing to use our website, you accept the use of cookies.