Bearings with housing

FAG, CRAFT, INA, KYK Japan, D-TEC and TOPROL housed bearing units – ready-to-fit bearing units bolted to the machine frame. They are used on conveyor, elevator, auger, fan and implement shafts because they are quick to fit and replace.

Housing types in stock

  • UCF – square 4-bolt flange, for wall or frame mounting
  • UCFL – oval 2-bolt flange, for narrow spaces
  • UCP – pillow block, for mounting on a flat surface
  • UCFC – round flange with spigot
  • GYE – bearing inserts with eccentric locking collar
  • ST/GW – agricultural bearing units

How to read the designation

In UCF 206 the letters indicate the housing type and the number the bearing insert. The last two digits give the shaft bore: multiply by 5, so 204 has a 20 mm bore, 206 a 30 mm bore and 208 a 40 mm bore. If only the bearing is worn and the housing is undamaged, just the insert with the same designation can be replaced.

Code Product Name Designation Brand Prefix Basic designation Suffix Alternative designation Inner diameter [d] or [Fw] (mm) Outer diameter [D] (mm) Width [B] or [H] or [C] (mm) Weight (kg) Price Add To Cart
GYE 45 ZZ bearing INA (GYE45-XL-KRR-B)
1012375 GYE 45 ZZ bearing "INA" (GYE45-XL-KRR-B) GYE45-XL-KRR-B INA - - - - - - - - 3.640,00 RSD
GYE 50 ZZ bearing INA (GYE50-XL-KRR-B)
1012376 GYE 50 ZZ bearing "INA" (GYE50-XL-KRR-B) GYE50-XL-KRR-B INA - - - - - - - - 4.139,00 RSD
GYE 55 ZZ bearing INA (GYE55-XL-KRR-B)
1012377 GYE 55 ZZ bearing "INA" (GYE55-XL-KRR-B) GYE55-XL-KRR-B INA - - - - - - - - 6.928,00 RSD
GYE 60 ZZ bearing INA (GYE60-XL-KRR-B)
1012378 GYE 60 ZZ bearing "INA" (GYE60-XL-KRR-B) GYE60-XL-KRR-B INA - - - - - - - - 7.283,00 RSD
ST491/GW209PPB7 bearing
1012441 ST491/GW209PPB7 bearing ST491/GW209PPB7 Z&S - - - - - - - - 0,00 RSD

What is the difference between UCF, UCFL and UCP housings?

UCF has a square 4-bolt flange, UCFL an oval 2-bolt flange, and UCP is a pillow block mounted on a flat surface. The new housing must be the same type as the old one so the bolt holes match.

How do I work out the shaft diameter from the designation?

Take the last two digits of the designation and multiply them by 5. For example, UCF 205 fits a 25 mm shaft and UCP 210 a 50 mm shaft.

Can I replace only the bearing without the housing?

Yes. If the housing is undamaged, only the bearing insert with the same designation is replaced (e.g. UC 206 for a UCF 206 housing). If the housing is cracked or the bolt holes are worn, the whole unit is replaced.

How is a housed bearing fixed to the shaft?

The bearing insert is locked to the shaft with set screws in the inner ring or with an eccentric collar (GYE type). Tighten the screws after bolting the housing to the frame, so the shaft does not run under strain.

Cookie settings

We use cookies to make this website work properly and to improve your user experience.
By continuing to use our website, you accept the use of cookies.