Bearings with housing
FAG, CRAFT, INA, KYK Japan, D-TEC and TOPROL housed bearing units – ready-to-fit bearing units bolted to the machine frame. They are used on conveyor, elevator, auger, fan and implement shafts because they are quick to fit and replace.
Housing types in stock
- UCF – square 4-bolt flange, for wall or frame mounting
- UCFL – oval 2-bolt flange, for narrow spaces
- UCP – pillow block, for mounting on a flat surface
- UCFC – round flange with spigot
- GYE – bearing inserts with eccentric locking collar
- ST/GW – agricultural bearing units
How to read the designation
In UCF 206 the letters indicate the housing type and the number the bearing insert. The last two digits give the shaft bore: multiply by 5, so 204 has a 20 mm bore, 206 a 30 mm bore and 208 a 40 mm bore. If only the bearing is worn and the housing is undamaged, just the insert with the same designation can be replaced.
| Code | Product Name | Designation | Brand | Prefix | Basic designation | Suffix | Alternative designation | Inner diameter [d] or [Fw] (mm) | Outer diameter [D] (mm) | Width [B] or [H] or [C] (mm) | Weight (kg) | Price | Add To Cart | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
1012104 | UCFL 209 bearing "FAG" (UCFL209-J7) | UCFL209-J7 | FAG | - | - | - | - | - | - | - | - | 3.708,00 RSD | |
![]() |
1012105 | UCP 204 bearing "FAG" (UCP204-J7) | UCP204-J7 | FAG | - | - | - | - | - | - | - | - | 1.515,00 RSD | |
![]() |
1012106 | UCP 205 bearing "FAG" (UCP205-J7) | UCP205-J7 | FAG | - | - | - | - | - | - | - | - | 1.794,00 RSD | |
![]() |
1012107 | UCP 206 bearing "FAG" (UCP206-J7) | UCP206-J7 | FAG | - | - | - | - | - | - | - | - | 2.523,00 RSD | |
![]() |
1012108 | UCP 207 bearing "FAG" (UCP207-J7) | UCP207-J7 | FAG | - | - | - | - | - | - | - | - | 2.522,00 RSD | |
![]() |
1012109 | UCP 208 bearing "FAG" (UCP208-J7) | UCP208-J7 | FAG | - | - | - | - | - | - | - | - | 3.307,00 RSD | |
![]() |
1012110 | UCP 209 bearing "FAG" (UCP209-J7) | UCP209-J7 | FAG | - | - | - | - | - | - | - | - | 3.708,00 RSD | |
![]() |
1012111 | UCP 210 bearing "FAG" (UCP210-J7) | UCP210-J7 | FAG | - | - | - | - | - | - | - | - | 3.953,00 RSD | |
![]() |
1012112 | UCP 211 bearing "FAG" (UCP211-J7) | UCP211-J7 | FAG | - | - | - | - | - | - | - | - | 6.174,00 RSD | |
![]() |
1012113 | UCP 212 bearing "FAG" (UCP212-J7) | UCP212-J7 | FAG | - | - | - | - | - | - | - | - | 0,00 RSD | |
![]() |
1012365 | UY 211 ZZ bearing "INA" (GRAE55-XL-NPP-B) | GRAE55-XL-NPP-B | INA | - | - | - | - | - | - | - | - | 5.839,00 RSD | |
![]() |
1012366 | UY 212 ZZ bearing "INA" (GRAE60-XL-NPP-B) | GRAE60-XL-NPP-B | INA | - | - | - | - | - | - | - | - | 7.515,00 RSD | |
![]() |
1012367 | RAE 25 ZZ bearing "INA" (RAE25-XL-NPP-B) | RAE25-XL-NPP-B | INA | - | - | - | - | - | - | - | - | 2.091,00 RSD | |
![]() |
1012368 | RAE 30 ZZ bearing "INA" (RAE30-XL-NPP-B) | RAE30-XL-NPP-B | INA | - | - | - | - | - | - | - | - | 2.516,00 RSD | |
![]() |
1012369 | RAE 35 ZZ bearing "INA" (RAE35-XL-NPP-B) | RAE35-XL-NPP-B | INA | - | - | - | - | - | - | - | - | 2.945,00 RSD | |
![]() |
1012370 | GYE 20 ZZ bearing "INA" (GYE20-XL-KRR-B) | GYE20-XL-KRR-B | INA | - | - | - | - | - | - | - | - | 1.776,00 RSD | |
![]() |
1012371 | GYE 25 ZZ bearing "INA" (GYE25-XL-KRR-B) | GYE25-XL-KRR-B | INA | - | - | - | - | - | - | - | - | 1.887,00 RSD | |
![]() |
1012372 | GYE 30 ZZ bearing "INA" (GYE30-XL-KRR-B) | GYE30-XL-KRR-B | INA | - | - | - | - | - | - | - | - | 2.259,00 RSD | |
![]() |
1012373 | GYE 35 ZZ bearing "INA" (GYE35-XL-KRR-B) | GYE35-XL-KRR-B | INA | - | - | - | - | - | - | - | - | 2.793,00 RSD | |
![]() |
1012374 | GYE 40 ZZ bearing "INA" (GYE40-XL-KRR-B) | GYE40-XL-KRR-B | INA | - | - | - | - | - | - | - | - | 3.372,00 RSD |
What is the difference between UCF, UCFL and UCP housings?
UCF has a square 4-bolt flange, UCFL an oval 2-bolt flange, and UCP is a pillow block mounted on a flat surface. The new housing must be the same type as the old one so the bolt holes match.
How do I work out the shaft diameter from the designation?
Take the last two digits of the designation and multiply them by 5. For example, UCF 205 fits a 25 mm shaft and UCP 210 a 50 mm shaft.
Can I replace only the bearing without the housing?
Yes. If the housing is undamaged, only the bearing insert with the same designation is replaced (e.g. UC 206 for a UCF 206 housing). If the housing is cracked or the bolt holes are worn, the whole unit is replaced.
How is a housed bearing fixed to the shaft?
The bearing insert is locked to the shaft with set screws in the inner ring or with an eccentric collar (GYE type). Tighten the screws after bolting the housing to the frame, so the shaft does not run under strain.



















