Combine harvester

Spare parts for Claas combine harvesters of all generations – from the Dominator and Mega series to Medion, Lexion, Tucano, Avero and Trion models. Filter parts by combine model and serial number, and the list will show only the parts that fit your machine.

Claas combine models covered

  • Dominator – from Dominator 38 and 48 to 98 VX, 106, 130 and 150
  • Mega – Mega 202, 204/203, 218/208, 350 and 370-360
  • Medion, Commandor and Avero
  • Lexion – 400, 500, 600, 700 and 5000–8000 series, including Montana and Terra-Trac versions
  • Tucano and Trion

Parts by assembly

  • Drive and crop transport – sprockets, clutches, hubs, sheet metal brackets
  • Bearings – thrust bearings and bearings by Claas part numbers
  • Hydraulics – hydraulic valves
  • Header – knife holders, friction rings

Each part carries the original Claas number with the CL prefix (e.g. CL 609421.0). If you know the number from the parts catalogue, enter it in the site search. Spare parts catalogues are available in the Catalogs section.

Code Product Name Designation Brand Catalogue Number Weight (kg) Price Add To Cart
CL 602148.3 COUNTER SHAFT 84.1 cm x 22 teeth
1008720 CL 602148.3 COUNTER SHAFT 84.1 cm x 22 teeth CL 602148.3 - - - 13.994,00 RSD
CL 603016.0 SEGMENT
1008745 CL 603016.0 SEGMENT CL 603016.0 - - - 0,00 RSD
CL 603309.0 SEGMENT
1008758 CL 603309.0 SEGMENT CL 603309.0 - - - 0,00 RSD
CL 603839.1 ANGLE DRIVE COMPLETE
1008770 CL 603839.1 ANGLE DRIVE COMPLETE CL 603839.1 - - - 0,00 RSD
CL 605134.1 SPROCKET Φ25 x 17 teeth
1008746 CL 605134.1 SPROCKET Φ25 x 17 teeth CL 605134.1 - - - 0,00 RSD
CL 605421.1 SPROCKET Φ25 x 20 teeth
1008747 CL 605421.1 SPROCKET Φ25 x 20 teeth CL 605421.1 - - - 0,00 RSD
CL 605481.0 SPROCKET Φ30 x 23 teeth x 15.875 mm pitch
1008748 CL 605481.0 SPROCKET Φ30 x 23 teeth x 15.875 mm pitch CL 605481.0 - - - 0,00 RSD
CL 605484.0 SPROCKET Φ30 x 17 teeth x 15.875 mm pitch
1008749 CL 605484.0 SPROCKET Φ30 x 17 teeth x 15.875 mm pitch CL 605484.0 - - - 3.130,00 RSD
CL 605587.1 BEVEL GEAR 23 teeth
1008727 CL 605587.1 BEVEL GEAR 23 teeth CL 605587.1 - - - 0,00 RSD
CL 605588.1 BEVEL GEAR 16 teeth
1008728 CL 605588.1 BEVEL GEAR 16 teeth CL 605588.1 - - - 0,00 RSD
CL 605791.1 BEVEL GEAR 16 teeth
1008729 CL 605791.1 BEVEL GEAR 16 teeth CL 605791.1 - - - 0,00 RSD
CL 606946.1 PINION SHAFT
1008771 CL 606946.1 PINION SHAFT CL 606946.1 - - - 14.540,00 RSD
CL 608007.0 SPLINED COUPLING
1008732 CL 608007.0 SPLINED COUPLING CL 608007.0 - - - 0,00 RSD
CL 608043.3 CONVEYOR SHAFT 1933 mm
1008722 CL 608043.3 CONVEYOR SHAFT 1933 mm CL 608043.3 - - - 0,00 RSD
CL 611220.01 KNIFE GUIDE [CL 610070.0]
1008764 CL 611220.01 KNIFE GUIDE [CL 610070.0] CL 611220.1 - - - 0,00 RSD
CL 626411.0 KNIFE HEAD WITH BALL JOINT NEW TYPE [CL 670406.1]
1008767 CL 626411.0 KNIFE HEAD WITH BALL JOINT NEW TYPE [CL 670406.1] CL 626411.0 - - - 0,00 RSD
CL 626749.1 UPPER CLIP (NEW TYPE)
1008733 CL 626749.1 UPPER CLIP (NEW TYPE) CL 626749.1 - - - 0,00 RSD
CL 626755.0 KNIFE HEAD BAR NEW TYPE FOR BOLT
1008716 CL 626755.0 KNIFE HEAD BAR NEW TYPE FOR BOLT CL 626755.0 - - - 0,00 RSD
CL 629690.0 PUSHING FLANGE
1008715 CL 629690.0 PUSHING FLANGE CL 629690.0 - - - 0,00 RSD
CL 629982.1 SPROCKET Φ30 x 19 teeth
1008731 CL 629982.1 SPROCKET Φ30 x 19 teeth CL 629982.1 - - - 0,00 RSD

How do I find parts for my exact Claas combine model?

Select your combine model in the filter above the list, then the serial number. Only the parts that fit that machine will remain in the list.

Why do I need the serial number as well as the model?

Claas changed some parts during the production of the same model. The serial number shows which production series the combine belongs to, so it determines the correct version of the part.

What does CL in the part name mean?

CL marks the original Claas part number. For example, CL 609421.0 is the part with Claas catalogue number 609421.0. You can also find the part by this number in the site search.

Why are some models listed as a range, e.g. Lexion 480-460?

A range means the part is the same for all models in that range. If your model is within the range, the part fits it.

Do you have parts for older Claas combines?

Yes. Besides modern Lexion, Tucano and Trion models, we also stock parts for older Dominator, Mega and Commandor combines.

Cookie settings

We use cookies to make this website work properly and to improve your user experience.
By continuing to use our website, you accept the use of cookies.