Connecting and offset links
Connecting and offset links for roller chains to European (B type) and American standard (A type and ANSI) – from small 04B and 05B pitches up to 28B chains, in simplex, duplex and triplex versions, plus heavy-duty (AH) and stainless steel (SS) links. A link always has the same designation as the chain it is intended for.
Connecting link or offset link
Connecting links join the two ends of a chain with an even number of links. Offset links (half links) are used when the chain has an odd number of links or needs to be shortened or extended by half a link, e.g. when tensioning a chain on a combine.
How to find the right link
Read the designation on the chain and enter it in the search or choose a subcategory. The number after the dash shows the number of strands: 12A-1 is simplex, 12A-2 duplex and 12A-3 triplex chain. American chains also carry an ANSI number, e.g. 12A-1 corresponds to ANSI 60-1.
| Code | Product Name | Designation | Brand | Catalogue Number | Pitch P (mm) | Pitch P (zoll) | Width between Inner plates b1 (mm) | Roller diameter d1 (mm) | Weight (kg) | Price | Add To Cart | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
1003270 | 210B connecting link | 210B CL | SHWARTZ | - | - | - | - | - | - | 76,00 RSD | |
![]() |
1003271 | 210B offset link | 210B OL | SHWARTZ | - | - | - | - | - | - | 131,00 RSD | |
![]() |
1002009 | 212A connecting link (ANSI 2060A) | 212A CL | SHWARTZ | - | - | - | - | - | - | 104,00 RSD | |
![]() |
1002010 | 212A offset link (ANSI 2060A) | 212A OL | SHWARTZ | - | - | - | - | - | - | 214,00 RSD | |
![]() |
1002006 | 212B connecting link | 212B CL | SHWARTZ | - | - | - | - | - | - | 68,00 RSD | |
![]() |
1002007 | 212B offset link | 212B OL | SHWARTZ | - | - | - | - | - | - | 136,00 RSD | |
![]() |
1003299 | 216A connecting link (ANSI 2080A) | 216A CL | SHWARTZ | - | - | - | - | - | - | 293,00 RSD | |
![]() |
1003300 | 216A offset link (ANSI 2080A) | 216A OL | SHWARTZ | - | - | - | - | - | - | 460,00 RSD | |
![]() |
1003273 | 216B connecting link | 216B CL | SHWARTZ | - | - | - | - | - | - | 144,00 RSD | |
![]() |
1003274 | 216B offset link | 216B OL | SHWARTZ | - | - | - | - | - | - | 161,00 RSD | |
![]() |
1003377 | 24A-1 connecting link (ANSI 120-1) | 24A-1 CL | SHWARTZ | - | - | - | - | - | - | 268,00 RSD | |
![]() |
1003378 | 24A-1 offset link (ANSI 120-1) | 24A-1 OL | SHWARTZ | - | - | - | - | - | - | 535,00 RSD | |
![]() |
1001990 | 24B-1 connecting link | 24B-1 CL | SHWARTZ | - | - | - | - | - | - | 314,00 RSD | |
![]() |
1001991 | 24B-1 offset link | 24B-1 OL | SHWARTZ | - | - | - | - | - | - | 644,00 RSD | |
![]() |
1003123 | 24B-2 connecting link | 24B-2 CL | SHWARTZ | - | - | - | - | - | - | 657,00 RSD | |
![]() |
1003124 | 24B-2 offset link | 24B-2 OL | SHWARTZ | - | - | - | - | - | - | 1.570,00 RSD | |
![]() |
1003264 | 24B-3 connecting link | 24B-3 CL | SHWARTZ | - | - | - | - | - | - | 1.381,00 RSD | |
![]() |
1003265 | 24B-3 offset link | 24B-3 OL | SHWARTZ | - | - | - | - | - | - | 2.530,00 RSD | |
![]() |
1002512 | 28A-1 connecting link (ANSI 140-1) | 28A-1 CL | SHWARTZ | - | - | - | - | - | - | 517,00 RSD | |
![]() |
1002513 | 28A-1 offset link (ANSI 140-1) | 28A-1 OL | SHWARTZ | - | - | - | - | - | - | 1.023,00 RSD |
When do I need an offset link instead of a connecting link?
When the chain has an odd number of links or needs to be shortened or extended by half a link. A connecting link is used when the number of links is even.
What does ANSI 60-1 next to 12A-1 mean?
It is the same chain size according to the American ANSI standard. 12A-1 and ANSI 60-1 are the same chain, so the same connecting link fits both.
Is an offset link weaker than the rest of the chain?
An offset link has bent plates, so it has a somewhat lower load capacity than a straight link. On heavily loaded drives it is better, whenever possible, to use a chain with an even number of links and a standard connecting link.




















